Oil Sludge Refining Machine
Oil Sludge mainly comes from crude oil extraction, transportation of oil in oil field, refinery sewage treatment plant and oil used during iron and steel smelting. Since there is large quantity of oil sludge, if we just leave it on the ground without treatment, it will not only occupy cultivated land, but also pollutes the surrounding soil, water and air. By using continuous pyrolysis plant of Shangqiu Jinpeng Industrial Co., Ltd. to deal with the oil sludge, we can both protect the environment and improve the economic benefit at the same time.
Flow-chat of continuous pyrolysis plant

Advantage of continuous pyrolysis plant
1. Large daily capacity of 30 MT raw materials, and can work 24 hours without any stop for 20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 3-4 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 10cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of continuous pyrolysis plant
NO.
|
ITEM
|
Technical Parameter
|
1
|
Suitable Raw Materials
|
Oil Sludge
|
2
|
Operating Mode
|
Fully Continuous Operation
|
3
|
Structure
|
Horizontal Type Revolve
|
4
|
Loading and discharging
|
Fully automatic feeding and discharging under high temperature at same time
|
5
|
Capacity(24h)
|
20-30Mt
|
6
|
Work Pressure
|
Slightly Negative Pressure
|
7
|
Reactor Rotational Speed
|
1R/M
|
8
|
Installation Power
|
110kw
|
9
|
Cooling Method
|
Cycle water
|
10
|
Type of Drive
|
Sprocket Wheel
|
11
|
Heating Method
|
Hot Air
|
12
|
Noise dB(A)
|
≤85
|
13
|
Main Reactor Weight (MT)
|
About 20Mt
|
14
|
Total Weight(MT)
|
About 45Mt
|
15
|
Installation Space Required
|
60m*20m
|
16
|
Manpower
|
2/shift
|
17
|
Shipment
|
5*40HC
|
18
|
Delivery time
|
≤70Days
|